Due to the circular coverage of wireless AP signals, in order to ensure that each wireless terminal connected to it can effectively receive communication signals, the wireless Ruijie access point should be placed in the center of the connected terminal.

If two Ruijie indoor APs are installed, they can be placed on two diagonal corners of the hall, ensuring that each terminal can access the wireless network at high speed.

Generally speaking, the isolation degree of adjacent frequency points is required to be>=35db. According to empirical values, when adjacent wireless access points are set to the same frequency point, an interval of more than 25 meters is required; When adjacent APs are set with adjacent frequency points, it is required that the AP be spaced at least 16 meters apart; When AP sets frequency separation points, it is required to have an interval of more than 12 meters

So to maintain a high-quality WLAN, it is necessary to consider the number of users within the coverage range, and the number of online terminal users for a single AP should not exceed 30.

Seamless roaming is now the standard configuration for networking. When deploying AP points, it is important to note that the coverage areas of AP signals should overlap with each other. All wireless APs must use the same SSID and IP address of the same network segment, and adjacent channels cannot overlap with each other.

Because the AP sends a detection signal every 100ms, the user can determine the quality of the network connection and then decide which AP to connect to. When the terminal roams between multiple APs, the new service AP notifies the original service AP through wired communication that a new connection has been established.