Motorized bikes are a popular means of transportation, but they can be noisy and smelly. An EMT conduit can help to solve these problems. The EMT conduit is a tube that connects the motorbike's engine to the exhaust pipe, eliminating the need for a loud and smelly exhaust system. The EMT conduit is also easier to install than a traditional exhaust system and can be customized to fit any bike. The EMT pipe is made of steel and is less likely to rust than other metals. It also has a much lower thermal conductivity and can be used in water-cooled engines. The EMT pipe is ideal for motorbikes and scooters with a single engine. The EMT pipe can have any diameter and be cut to fit any bike. The EMT conduit is a great way to eliminate the noise and smell of your motorbike exhaust system. It also provides a much cleaner look. 

‍What is an EMT conduit, and why would you want to use it?

‍EMT conduit is a metal pipe which is used to vent the exhausts from a motorcycle or other vehicle. It can be used on any bike with a single-cylinder engine, such as mopeds or scooters. The pipes are made of steel and will never rust. You can choose to have your EMT pipe cut to length or buy a ready-cut piece of EMT conduit. The two pipes are used in conjunction with one another to create a piping arrangement that will vent the exhaust gases from your motorbike's engine. The exhaust gases are routed through the EMT pipe to a muffler or tailpipe. The exhaust gases then enter the next section of the EMT pipe, which connects to your tailpipe on the bike. The two pipes are connected together with a removable baffle. The EMT pipe is made of steel and is available in different lengths, depending on your specific needs. 

‍Materials and Tools: What you will need to make the EMT conduit?

‍The first thing you will need to do is purchase the EMT pipe. You can get this at a local hardware store or on the Internet. The length of the EMT pipe depends on your specific needs and interest in making things work out better for your bike's engine. The EMT pipe also comes in various diameters, and you can purchase the one needed for your bike. The next thing you will need is a pair of needle nose pliers. These are usually sold at auto parts stores and are used to squeeze the metal fittings together. 

‍Procedure: How to make the EMT conduit?

‍Step 1: Measure out the length of the EMT pipe needed for your bike.

Step 2: Cut the EMT pipe to the correct length.

Step 3: Cut off the ends of the EMT pipe.

Step 4: Insert the needle nose pliers into the end of the EMT pipe and squeeze them together.

Step 5: Repeat step 4 for the other end of the EMT pipe.

Step 6: Reattach the ends of the EMT pipe with a small nut and bolt. 

‍Results and Conclusion: What you can expect from using the EMT conduit?

‍The EMT conduit works very well in making electrical and control cables for your bike. The main problem with this type of cable is that it can be more expensive than other types of cables, but it's not too bad.